控制舒适
增加控制, 减少浪费, 并最大限度地为您的客人提供舒适, all while optimizing energy usage when you install and program occupancy-based thermostat controls in your rooms.
在没有预定的地方，比如酒店, 基于占用度的恒温器控制是理想的节能装置. Typical hotel guest behavior includes setting room temperatures to that which is comfortable and leaving that setting unchanged upon exiting the room. Occupancy-based thermostat controls rely on extremely sensitive light- and heat-detecting sensors to heat and control a space, 当客人在场或离开房间时，有特别的反应. 不要被误解为仅仅是“可编程的”, “连接”, 或者是基于调度的“智能”恒温器, 这些恒温器传输实时数据, 基于占用率, to maintain a setpoint temperature when a room is occupied and then let it drift to an unoccupied setback temperature when your guests have walked out the door.
By upgrading to and programming new occupancy-based thermostat controls in your rooms you can save 15-30% off your 暖通空调 energy! Your guests will be provided with a comfortable stay and you will be able to control the wasted heating and cooling that you’re paying for when your rooms are unoccupied.
你得到了什么
Receive Pre-Approval for a PSE rebate of up to $300 per unit when planning to upgrade to new occupancy-based thermostat controls. 此回扣要求在安装前预先批准, 不能超过合格产品的购买价格, 不包括安装费用, 劳动, 或税收. 如果恒温器费用(无需安装), 劳动, (或税)低于$300每单位，则PSE回扣将不超过单位成本.
示例1:
- 基于占用的恒温器单位成本为125美元，不包括安装、人工或税;
- PSE返利= $125(返利不超过您购买该设备的费用)
示例2:
- 基于占用的恒温器单位成本为325美元，不包括安装、人工或税收;
- PSE回扣= $300(回扣不超过$300)
PSE requires invoicing showing the line itemed costs of the project in order to determine Pre-Approved PSE rebate amount.
Occupancy-based恒温器
电动-高达300美元
你有什么资格?
- 您必须是酒店/住宿行业的PSE商业电力客户. 这也可能包括:
- 寄宿/宿舍，公寓酒店，宿舍和庇护设施.
- 安老院舍的类型, 用于此回扣的用途包括:养老院, 退休之家, 辅助生活.
- 你必须有现有的单一暖通空调系统，使用电加热.
- Packaged Terminal Air Conditioners (PTAC) and 封装式终端热泵s (PTHP) both qualify as existing heating sources.
- 燃气供暖不符合这项回扣的条件.
- 不确定你现在拥有什么? 给我们发一封电子邮件，告诉我们制造商和型号，我们会和你一起调查的.
- New 建设 projects are not eligible for this rebate unless t在这里 are 50 or fewer total guest rooms.
- This rebate is specifically for thermostats controlled by physical guest room occupancy; for interest in other types of thermostats please visit PSE的暖通空调页面 检查是否有折扣.
要获得这一回扣，有三件事必须到位:
- 基于占用的恒温器不能已经安装.
- Your thermostat must be new and equipped with occupancy based temperature control features, either:
- 独立的客房恒温器，或
- 联网客房恒温系统
- 恒温器必须编程以满足PSE的资格要求:
- The unoccupied room temperature setpoint must be at least 5⁰ higher in cooling mode and at least 5⁰ lower in heating mode than the occupied heating and cooling setpoints.
- Sufficient minimum unoccupied set points are 80⁰ in cooling mode and 60⁰ in heating mode; occupied setpoints are requested on the rebate application and may be discussed prior to pre-approval.
- Factory setpoints do not qualify and are often left unchanged when installed; ensure that setpoints are programmed in order to qualify.
- An onsite visit with a PSE Verification Specialist who will go into the programming of your thermostats and confirm setpoints are present as they were stated on the rebate application.
- 对于安装少于75个房间的设施, 15间已安装(和空置)的房间将随机抽样并核实.
- 75间或以上房间的设施, 20%的已安装(和空置)房间将被随机抽样和核实.
- 温控器内显示已占用和未占用设定值的编程照片.
- 此回扣仅适用于按上述规格编程的新恒温器.
- New 建设 projects are not eligible for this rebate unless facility has 50 total guest rooms or fewer.
- Product Specification Sheets and/or Programming Manuals must be submitted with pre-approval paperwork (this will be used to pre-approve the proposed thermostat and confirm programming capabilities).
- 您需要提供您的报价*副本, 发票, 或购买产品的收据, 显示:
- 制造商及型号 (this will be used to pre-approve the proposed thermostat and confirm programming capabilities).
- 分项单位成本(这将用于确定和预先批准回扣金额).
- 您必须提交一份完整的 W-9纳税人识别表 为了你的生意.
- 所有项目必须在当前日历年内开具发票、安装并提交给PSE.
- 一旦获得预先批准, PSE will hold project submissions “in-progress” until installation and sufficient verification has been completed prior to approving payment of any rebates.
一旦安装，PSE要求在支付PSE回扣之前证明正确的温度设定值. 这可以通过以下两种方式之一完成:
PSE将直接与您合作, 根据预审批表上提供的联系方式, in order to complete this verification once pre-approved installation and programming have been completed.
To be eligible for PSE’s Occupancy-based Thermostat Control rebate you must first receive Pre-Approval prior to installation. 为此，需要满足以下要求:
在这个过程中，步骤的时机是很重要的. 尽早向PSE提交项目预批准文件(见下文)! 以确保您和设备有资格获得退税, 并帮助防止在这个过程中出现任何潜在的失误, submit the required project documentation at the beginning of your project timeline so that key details can be qualified and confirmed by PSE and Pre-Approval can be given for project installation. 这将先发制人的任何不合格的项目细节和随后的回扣拒绝.
If installation activity has already begun, please contact us immediately to discuss your project.
如需帮助验证您的资格，请发送电子邮件至 lodging@wikiwagsdisposables.com.
如何申请
申请项目的预批准, 请使用这个方便的清单提交项目文件. 一旦PSE收到下面列出的所有项目文件并符合PSE的项目资格, a rebate Pre-Approval notification will be sent to you to proceed with equipment installation and programming. 如果所要求的任何文件不完整或不符合条件, 您将收到通知，其中包含解释和/或下一步操作的说明.
将所有项目文件发送至 lodging@wikiwagsdisposables.com:
所有设备的安装和编程完成后, please notify PSE by responding to your Pre-Approval email thread so that the verification process can begin. Once the installation and setpoint verification have been completed and approved you should expect to receive your rebate** within 6 to 8 weeks.
* A Quote is acceptable in the Pre-Approval stage of your project if the equipment has not yet been purchased, 然而，在付款前确认回扣金额*之前，将需要最终发票.
** Any PSE’s pre-approved rebate amount is subject to change in the event that equipment pricing on final invoicing differs from previously submitted quote or 发票. PSE回扣将以最终发票设备价格为基础.
额外的信息
中小型住宿效率计划
If your facility has 150 rooms or less you may also qualify for a no-cost energy assessment with one of our small business energy experts. 阅读更多有关该计划如何使您的业务受益的信息 在这里.
包装终端热泵(PTHP)回扣
PSE can help replace your aging and/or ailing PTACs with efficient PTHP, saving you time and money. 请查看 封装式终端热泵 点击这里了解更多关于这个机会的信息.
商业餐饮服务回扣
PSE has an extensive rebate program to help your business upgrade to energy efficient foodservice equipment. This could be anything from the ice machine found on each floor to the heavy equipment found in your hotel restaurant. 参观 商业食品服务设备退税计划 点击此处了解更多信息.
